Skip to content

Open Floor Plan House Plans

In open floor plan house plans, the kitchen, dining and living areas share one space or link through wide openings instead of doors. This page shows both as editable plans, and how to open up any other plan in the editor before anyone touches a real wall.

Edit this floor plan

Fully open: one room for living, dining and cooking

Apartment3 rooms52.5 m² · 565 sq ft
2D floor plan of the Apartment template, Ground Floor: 1 bedroom, 1 bathroom, living room, kitchen, 52.5 m² (565 sq ft)
The Apartment template: 1 bedroom, 1 bathroom, living room, kitchen; 52.5 m² (565 sq ft) of rooms, 10.50 × 5.00 m (34′ 5″ × 16′ 5″) overall between wall center lines.
This drawing is generated from the template itself. Open it to edit every wall, room and piece of furniture.Open this plan in the editor

Every room size in the Apartment plan

Zones instead of walls

In this layout one 7.0 × 5.0 m (23′ × 16′ 5″) room holds three zones. The kitchen runs along the end wall, the dining table sits under the 2.4 m (7′ 10″) window, and the sofa, coffee table and TV stand form a lounge at the other end, marked by a rug rather than a wall. The front door opens into the room, and the bedroom and bathroom open off it.

Partly open: rooms joined by wide openings

Villa12 rooms2 floors216.0 m² · 2325 sq ft
2D floor plan of the Villa template, Ground Floor: 1 bedroom, 1 bathroom, living room, kitchen, dining room, 12.00 × 9.00 m
Ground Floor of the Villa template: 1 bedroom, 1 bathroom, living room, kitchen, dining room; 108.0 m² (1,163 sq ft) of rooms, 12.00 × 9.00 m (39′ 4″ × 29′ 6″) overall between wall center lines.
This drawing is generated from the template itself. Open it to edit every wall, room and piece of furniture.Open this plan in the editor

Every room size in the Villa plan

The broken-plan alternative

The villa takes a middle route. Its living room, 7.0 × 5.5 m (23′ × 18′ 1″), and kitchen-dining room are separate rooms joined by a 1.2 m (3′ 11″) wide opening, and the living room meets the hall the same way. You can see from the kitchen to the sofa, but cooking smells and noise do not fill the whole floor, and each room keeps its walls for furniture and storage.

Open up any plan in the editor

  1. Keep a copy first

    Duplicate the project from your project list so you can compare the open and closed versions.

  2. Delete the wall

    Select the wall between two rooms and delete it. The two rooms become one, with the combined area.

  3. Or add a wide opening

    Drag an Opening from the library onto the wall and set its width; the rooms stay separate.

  4. Zone it with furniture

    Place a rug, a sofa back or a dining table to mark each area, and check the sightlines in 3D.

Before you knock through

  1. Structure

    Some walls carry the floor or roof above. The editor does not know which; ask a structural engineer before removing a real wall.

  2. Cooking smells and noise

    A wide opening, as in the villa, keeps some separation between kitchen and lounge.

  3. Storage

    Fewer walls means less wall to put cupboards and shelves against. Plan them first.

  4. Walking routes

    Without walls, the route from the door to the kitchen can cut through the seating. Keep it to the edge of the room.

Frequently asked questions

What is an open floor plan?

A layout where two or more of the kitchen, dining and living areas share one space without full-height walls between them.

Does deleting a wall in the editor merge the rooms?

Yes. Rooms are the spaces enclosed by walls, so removing the wall between two rooms leaves one room with their combined area.

Can I keep a half wall or kitchen island?

Draw a short wall that does not close off a room and lower its height in the wall properties, or use the counter from the library as an island.

Can I compare open and closed versions?

Yes. Duplicate the project and open up the copy, then switch between the two in your project list.

Can I add a sliding door between the zones?

The editor draws hinged doors and plain openings. For a sliding door, place an opening of the right width and add a text label.

Ready to plan your space?

It is free, runs in your browser and needs no account. Projects are saved privately on this device.

Edit this floor plan